SDRlab 122-16 Standard kit


 What is in the box:

- Red Pitaya SDRlab 122-16 board
- SD card (16GB, class 10)
- ETH cable (1m)
- Power supply (5V, 2A)

- Tailored for SDR & other RF applications, HF and 50MHz bands

- No DC coupling ! minimum RF Input frequency (-3dB): 300kHz

- Comes with two 16 bit ADCs 50 ohm inputs; 14 bit DACs 50 ohm outputs
- Three times bigger dual core ARM Cortex A9 + Xilinx Zynq 7020 FPGA
- Bigger FPGA provides more real-time processing capabilities
- Hardware compatible with HPSDR
- Improved distortions, dynamic range, sensitivity, noise & crosstalk



All Red Pitaya units come with pre-instlled software but if you want to update to the latest and greatest you can do so for free here.


Technical specifications


FPGA: Xilinx Zynq 7020 SOC
RAM: 512 MB


Ethernet: 1 Gbit
USB: 2.0
WIFI: requires Wi-Fi dongle

RF inputs

Channels: 2, AC coupling only
Input impedance: 50 Ohm
ADC SNR: 76 dBfs
Lowest RF Input frequency (-3dB): 300kHz
ADC bandwith: (direct RF sampling): 300kHz to 550MHz
Sample rate: 122.88 MS/s
ADC resolution: 16 bit
Full scale voltage range: 0.5 Vpp /-2 dBm
Absolute Max. Input volt range: DC max 50V (AC-coupled), 1 Vpp for RF
Input protection: N/A, RF transformer & AC-coupled
Overload protection: DC voltage protection

RF outputs

Channels: 2
Sample rate: 122.88 MS/s
DAC resolution: 14 bit
DAC SFDR @ 10Mhz: 86 dBc
DAC SFDR @ 30Mhz: 67 dBc
Lowest output RF frequency (-3dB): 300kHz
Sampling CLK phase noise @ 100 Hz offset: -110dBc
Sampling CLK phase noise @ 1 kHz offset: -140dBc
Voltage range: 1 Vpp / +4 dBm
Load Impendance: 50 ohm
Short circuit protection: Yes

Extension connector

Digital lOs: 16
Analog inputs: 4
Analog inputs voltage range: 7 V
Sample rate: 100 kS/s
Resolution: 12 bit
Analog outputs: 4
Analog outputs voltage range: 0-1,8 V
Communication interfaces: I2C, UART, SPI
Available voltages: +5 V, + 3,3 V, -4 V

SDRlab122-16 main specs

Used in SDRlab 122-16 Design


14-Bit, 125 MSPS Dual TxDAC+® Digital-to-Analog Converter. Click here for manufacturer specifications


16-Bit, 125Msps Low Power Dual ADC. Click here for manufacturer specifications


Dual 4MHz, 3A Synchronous Step-Down DC/DC Converter. Click here for manufacturer specifications