STEMlab ^125-14 SDR transceiver kit basic

576,00€ _{+ shipping costs} _{+22% VAT (126,72€)}

What is in the box:

- Red Pitaya STEMlab 125-14 board
- 160-10m, 10W transceiver module
- Impedance transformer board
- SD card (4GB, class 8)
- ETH cable (1m)
- Power supply (5V, 2A)

Jorg Saure (What is so special about making an SDR transceiver with Red Pitaya by yourself?)

The answer to that is that, in a short period of time, you will experience a sense of and create a super SDR transceiver which can be compared to other equipment in a considerably higher price achievement range.
Bob Wilson, N6TV

"Thanks to Pavel Demin's free SDR Receiver App, the Red Pitaya can be used by both CW Skimmer Server and RTTY Skimmer Server to monitor about 180 kHz on each of EIGHT different radio bands, simultaneously. I'm not aware of any other SDR currently on the market that can do this so well at such a low cost."

HAM Radio Applications

SDR transceiver

STEMlab 125-14 coupled with SDR transceiver module and free of charge customized Power SDR STEMlab/HAMlab edition becomes a fully functional SDR transceiver with 160-10m band coverage and 10W of output power. It gives you an out of the box, affordable and high performance SDR transceiver solution. All you need is an antenna and you can start your Software Defined Radio experience!

Learn more

WSPR

WSPR stands for Weak Signal Propagation Reporter. It is a computer program used for weak-signal radio communication between amateur radio operators. The program is designed for sending and receiving low-power transmissions to test propagation paths on the MF and HF bands.

Learn more

Skimmer Server

Pavel Demin has released a new version of his Red Pitaya SDR software that can support skimming on up to 8 bands simultaneously at 192 kHz, making it more powerful than the QS1R, which could only skim 7 bands.

Learn more

T&M Instruments

Oscilloscope This application will turn your STEMlab board into a 2-channel Oscilloscope.	Learn more
Signal generator This application will turn your STEMlab board into a 2-channel Signal generator.	Learn more
Spectrum analyzer This application will turn your STEMlab board into a 2-channel DFT Spectrum Analyzer.	Learn more
Bode analyzer This application will turn your STEMlab into an affordable Bode analyzer.	Learn more
Logic analyzer Pro This application turns your STEMlab board into an 8 channel Logic Analyzer.	Learn more	79.00€
LCR meter This application will turn your STEMlab into an affordable LCR meter.	Learn more	299.00€
Marketplace It is a place where free of charge open source applications developed by our community members are available within a single click for immediate experience and use.	Learn more

Accessories

Basic Accessories Kit

- SD card
- power supply
- ethernet cable

Diagnostic Accessories kit

- 2x osciloscope probes
- 2x SMA to BCN adapter
- 2x 50 ohm termination
- 2x SMA T adapter
- WIFI dongle

39.00€

Cases

Acrylic

The acrylic case is the most convenient option to protect your Red Pitaya STEMlab.

Learn more

19.00€

Aluminium

The Aluminium case is the best option to protect your Red Pitaya STEMlab with STYLE.

Learn more

49.00€

Other

	Calibrated Calibration is performed in noise controlled environment. Inputs and outputs gains are calibrated with 0.02% and 0.003% DC reference voltage standards. Input gains calibration is performed in medium size timebase range. Red Pitaya STEMlab board is a non-shielded device and its inputs/outputs ground is not connected to the earth grounding. To achieve calibration results stated below, Red Pitaya must be grounded and shielded.
	Compliance CE, FCC
	1 year warranty
	30 day return policy