|
What is in the box: - Red Pitaya STEMlab 125-14 board
Software All Red Pitaya units come with pre-instlled software but if you want to update to the latest and greatest you can do so for free here.
|
|
|
SDR receiverSTEMlab coupled with Impedance board and free of charge customized Power SDR STEMlab/HAMlab edition becomes a fully functional SDR receiver with 0 - 60 MHz band coverage. You can use it also as an CW and RTTY Skimmer server, Weak Signal Propagation Reporter as well as Oscilloscope, Signal Generator, Spectrum Analyzer and if you are a constructor you can easily transform it into an fully functional SDR transceiver by adding your custom filters and amplifier. |
Learn more | |
|
|
WSPRWSPR stands for Weak Signal Propagation Reporter. It is a computer program used for weak-signal radio communication between amateur radio operators. The program is designed for sending and receiving low-power transmissions to test propagation paths on the MF and HF bands. |
Learn more | |
|
|
Skimmer ServerPavel Demin has released a new version of his Red Pitaya SDR software that can support skimming on up to 8 bands simultaneously at 192 kHz, making it more powerful than the QS1R, which could only skim 7 bands. |
Learn more |
|
|
OscilloscopeThis application will turn your STEMlab board into a 2-channel Oscilloscope. |
Learn more | |
|
|
Signal generatorThis application will turn your STEMlab board into a 2-channel Signal generator. |
Learn more | |
|
|
Spectrum analyzerThis application will turn your STEMlab board into a 2-channel DFT Spectrum Analyzer. |
Learn more | |
|
|
Bode analyzerThis application will turn your STEMlab into an affordable Bode analyzer. |
Learn more | |
|
|
Logic analyzer ProThis application turns your STEMlab board into an 8 channel Logic Analyzer. |
Learn more | 68.00€ |
|
|
LCR meterThis application will turn your STEMlab into an affordable LCR meter. |
Learn more | 343.00€ |
|
|
MarketplaceIt is a place where free of charge open source applications developed by our community members are available within a single click for immediate experience and use. |
Learn more |
|
|
Basic Accessories Kit- SD card |
||
|
|
Diagnostic Accessories kit- 2x osciloscope probes |
34.00€ |
|
|
AcrylicThe acrylic case is the most convenient option to protect your Red Pitaya STEMlab. |
Learn more | 16.00€ |
|
|
AluminiumThe Aluminium case is the best option to protect your Red Pitaya STEMlab with STYLE. |
Learn more | 42.00€ |
|
|
CalibratedCalibration is performed in noise controlled environment. Inputs and outputs gains are calibrated with 0.02% and 0.003% DC reference voltage standards. Input gains calibration is performed in medium size timebase range. Red Pitaya STEMlab board is a non-shielded device and its inputs/outputs ground is not connected to the earth grounding. To achieve calibration results stated below, Red Pitaya must be grounded and shielded. |
||
|
|
Compliance CE, FCC |
||
|
|
1 year warranty |
||
|
|
30 day return policy |
|
|
STEMlab125-14 main specs
|
|
|
LTC2145-14ADC (analog-to-digital converter) 2ch simultaneous sampling 14-bit, high frequency, for wide dynamic range signals, low power. Click here for manufacturer specifications |
||
|
|
AD9767DAC (digital-to-analog converter), dual-port, high speed, 2-channel, 14-bit. Click here for manufacturer specifications |
||
|
|
LTC3615Dual 4MHz, 3A Synchronous Step-Down DC/DC Converter. Click here for manufacturer specifications |
Today we have great news to share with you! The new Red Pitaya Beta OS v 1.04-6 for STEMlab 125-14, 125-10 & SDRlab 122-16 models is now available. Read on for more information and scroll down to download it for free!
Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system.
A basic SDR system may consist of a personal computer running SDR software that interfaces with analog-to-digital converter over USB or ethernet, preceded by some form of RF front end with RF amplifiers, filters and attenuators.
Whilst the Red Pitaya STEMlab has a huge amount of functionality, it is very easy to set up and use. Instructions are available on the Red Pitaya website.
The following essential items needed to start are already included in each RedPitaya kits available from our WEB store
New Red Pitaya Beta OS v1.03 is released for all Red Pitaya products. Besides general improvements, we have implemented SCPI server support for SIGNALlab 250-12. The new OS can be downloaded for free.
Returns are easy!
We are so confident about our product.
