The Logic Analyzer application enables the representation of the binary states of digital signals.

What is in the box:

- 8ch Logic Analyzer Probes
- Lifetime license with free updates

Logic Analyzer Details

Specifications

Video Demo

Description:

The Logic Analyzer application enables the representation of the binary states of digital signals. The Logic Analyzer can both deal with purely binary signals, such as GPIO outputs of the Raspberry Pi or Arduino board, as well as analyze different bus (I2C, SPI, and UART) and decode the transmitted data. All Red Pitaya applications are web-based and do not require the installation of any native software. Users can access them via a web browser using their smartphone, tablet or a PC running any popular operating system (MAC, Linux, Windows, Android, and iOS).

Compatibility:

- STEMlab 125-10, STEMlab 125-14 or SDRlab122-16 board

What is in the box:

- Logic Analyzer board integrated into an ALU case
- 8ch Logic Analyzer Probes
- Lifetime license with free updates

Logic Analyzer Details

Specifications

Video Demo

Youtube i2C example video

This is an additional module and you will need a  STEMlab 125-10/14  to use it.

What is in the box:
- LCR meter board
- Ribbon cable
- SMA to SMA cable
- 2x Clip probes

LCR Details

Specifications

Video Demo

The acrylic case is the most convenient option to protect your Red Pitaya STEMlab.

The ALU case is the best option to protect your Red Pitaya STEMlab with STYLE.

Compatibility:

- STEM^lab  125-10

- STEM^lab  125-14

- SDRlab 122-16  (former STEM^lab  122.88-16) 

What is in the box:

- Aluminium enclosure

- 4 screws

- rubber feet

- Thermal conductive pad

What is in the box:

- 2x osciloscope probes
- 2x SMA to BCN adapter
- 2x 50 ohm termination
- 2x SMA T adapter
- WIFI dongle (only for client mode)
- Logic Analyzer Probes and cable

Optimized for connecting HF antennas to the STEMlab 125 series. Steps up 50 ohm antennas and pre-amps to the high impedance inputs, Improves sensitivity and performance.

Less than 1 dB insertion loss from 2-50 MHz

What is in the box:
- sensor extension module (1pcs)
- Jupyter programming

What is in the box:
- RF swr bridge in aluminium enclosure
- SMA male calibration accessories (50 ohm, open & short loads)
- 2x SMA to SMA cable

Learn more

Introducing Heatsink Interface for Red Pitaya

Although so far no Red Pitaya boards were killed by heat stroke, some of our customers feel it's better to be on the safe side.

Keep your Red Pitaya board cool with this heatsink interface. Quality aluminum heatsink with adhesive thermal layer will protect your Red Pitaya from overheating.

• Incredibly effective cooling.
• Eliminates the risk of hardware failure due to overheating.
• Low profile, will fit into most OEM devices.
• Quiet, simple, passive cooling. No need for noisy fans.
• Perfectly sized for the Red Pitaya board.
• Comes with self adhesive thermal layer for easy application.
• Boosts long-term performance.
• Quick and simple installation. 

Compatible with STEM 125-14bit.

PCBite kit with 2x SP100 100 Mhz hands free oscilloscope probes

The Sensepeek's PCBite kit allows for effortless contact maintaining when probing digital or analog signals with your Red Pitaya oscilloscope.

This complete kit includes everything you need for hands-free measurements with your oscilloscope. SP100 is the first truly handsfree 100Mhz 10:1 oscilloscope probe!

 Makes instant measurements or long triggering sessions a breeze. No more soldering wires to connect your probe or complicated tools to setup, just positioning the probe needle on any test point or component in the signal path and release. Saves time and frustration during development, verification and repairs.

The minimalist design and the spring loaded test needle makes it possible to simultaneously measure on fine pitch components and nearby signals. The ground probe connection has a detachable quality hook and the cable fits directly on a 2.54mm (0.100”) pitch pin header. If you need an even more flexible and handsfree ground (or other reference) connection then our passive 1:1 readout probe SP10 (sold separately) is a great companion. Just connect the included short wire between the SP100 and SP10 pin headers! The SP100 comes with a powerful magnet in the base, as for all PCBite probes and holders which makes the probe easy to place and reposition. 

What is in the box:

- 4× PCBite holder 1x Large Base plate (A4) 2x SP100

- 100 Mhz handsfree oscilloscope probes (article 4013)

- 1x Set of yellow insulation washers

- 1x Micro fiber cloth

User Guide

SP100 Gain_Loss vs. Frequency